Products > Automation > Photo-Electric Sensors > Autonics
Photo-Electric Sensors
| BJ Series: | |
| POWER SUPPLY: | 12 to 24VDC ±10% |
| OUTPUT: | NPN/PNP Open Collec tor output. |
| Loadholt: | Max 26.4VDC, Max100mA |
| OPERATION MODE: | Leighton/DarkON Select able by Variable RESISTOR |
| RESPONSE TIME: | Max.1ms |
| SENSITIVITY ADJUSTMENT: | Built-in by adjustable Variable RESISITOR |
| PROTECTION: | IP65 |
| BX-Series: | MULTI-VOLTAGE TYPES |
| POWER SUPPLY : | 24 to 240VAC ± 10%, 50/60Hz and 12 to 240 VDC ±10% |
| PROTECTION: | IP66 for dust and water |
| OUTPUT: | Relay,1C Contacts, 1A/250 VAC or 2A/30 VDC (resistive load) |
| OPERATION INDICATOR: | Red LED for output |
| Self-Diagnostic OUTPUT: Green LED | |
| RESPONSE TIME: | Less than 20ms |
| SENSITIVITY: | Adjustable |
| OPERATION TEMPERATURE: | -200Cto+650C |
| SUPPLIED WITH MOUNTING BRACKET |
| BEN- Series: | |
| POWER SUPPLY: | 24 to 240 VAC ± 10%, 50/60Hz and 24 to 240 VDC ±10% |
| OUTPUT: | Relay,1C Contacts,3A/250 VAC or 3A/30 VDC (resistive load) |
| OPERATION MODE: | Light ON / Dark ON Selectable |
| RESPONSE TIME: | Max.20ms |
| SENSITIVITY: | Adjustable |
| PROTECTION: | IP50 |
| BTS- Series: | |
| 1.Model: BTS30-LDTL-P Sensing Range |
Convergent Reflective Type Type: 5 to 30mm |
| Power Supply: | 12 to 24VDC ± 10% |
| Protection: | IP67 |
| Control Output: | PNP Open Collector |
| Response Time: | Max 1ms |
| Light Source: | Red LED (650nm) |
| Operating Temperature: | -20 to 550C |
| 2.Model: BTS200-MDTL-P: | Retroreflective Type |
| Sensing Range: | 10 to 200mm |
| Power Supply: | 12 to 24VDC ± 10% |
| Protection: | IP67 |
| Control Output: | PNP Open Collector |
| Response Time: | Max 1ms |
| Light Source: | Red LED (650nm) |
| Operating Temperature: | -20 to 550C |
| 3.Model:BTS1M-TDTL-P: | Through-beam type |
| sensing range: | 1mm |
| Protection: | IP67 |
| control output: | PNP Open Collector |
| ResponseTime: | Max 1ms |
| LightSource: | Red LED(650nm) |
| operating temperature: | -20 to550C |
| BR- Series: | |
| CYLINDRICAL BODY DIA: | 18mm |
| PROTECTION: | IP66 |
| BUILT-IN PROTECTION AGAINST TRAVERSE POWER POLARITY | |
| OPERATING VOLTAGE: | 12 to 24VDC ±10% |
FEATURES:
- High-Speed response time: 1 mSec
- Built-in short circuit protection
- Reverse polarity protection
- The solid construction of the aluminum die-cast case.
- ResponseTime : 1ms
- Sensitivity :Adjustable
- ProtectionStructure :IP65
- ProtectionCircuit : Short Circuit Protection; Reverse PolarityProtection
BF4 Series
The BF4 series fiber optic amplifiers feature high-speed response times and various functions to provide reliable detection of small or fast moving targets.The units feature convenience functions such as auto-sensitivity adjustment and advanced features including mutual interference prevention and self-diagnosis function. The amplifiers can be used together with fiber optic cables from Autonics for optimal performance.
- High-speed response under 0.5 ms
- Standard type / external synchronization type / remote sensitivity setting type
- Auto sensitivity adjustment / remote sensitivity adjustment
- Mutual interference prevention function, self-diagnosis function
- Built-in reverse polarity protection circuit, output short-circuit (overcurrent) protection circuit
- Timer function: 40 ms OFF delay (standard type, remote sensitivity setting type)
- Switch between Light ON and Dark ON modes by sensitivity adjustment
BF5 Series
- Available in dual and single display models
- 5 response speeds
- Ultra-fast mode (50 ㎲), fast mode (150 ㎲), standard mode (500 ㎲), long-distance mode (4 ms), ultra-long-distance mode (10 ms)”
- Display range: 0-4000 (standard mode), 0-9999 (long-distance mode)
- Saturation prevention function: prevent errors from saturation of received light
- Inverted display: invert displays depending on installation for easier reading
- Long term stability without diode deterioration and minimal influence from temperature changes
- Multiple sensitivity setting modes
- Auto-tuning, one-point teaching (maximum sensitivity), two-point teaching, position teaching”
- Various LED light sources (red, green, blue) available for diverse applications
- Slim and compact design (W 10 x H 30 x L 70 mm)
BWP Series
- Flat body (13 mm) area sensors with Fresnel lens
- High strength PC/ABS plastic body
- High-speed response time under 7 mSec
- 4 configurations (optical axis: 8 to 20 / detection area: 140 to 380 mm)
- Light ON/Dark ON operation mode switch
- Job indicator ON/FLASHING switch
- Bright LED indicators on emitter and receiver
- Operation test (emitter stop) function, mutual interference prevention function
- IP65 protection structure (IEC standard)
|
PSA Series Digital pressure sensors |
|
| Pressure Range | -50 to 1,000 kpa/0 – 10kgf/cm² |
| Power Supply: | 12~ 24VDC ± 10% |
| Control Output: | NPN Open Collector output |
| Max. 100mA load current | |
| Analog Output: | 1V ~ 5VDC ±2%FS |
| Response time: | Selectable 2.5ms, 5ms, 100ms, 500ms |
