Gen-set & Synchronization Controllers

Special Features

• Back lit icon type large LCD display
• USB/OpticalandWi-Fiportonfrontforprogramming
• Gen-set Control with auto matic management of mains-generator Switching
• AMF with Pick-up speed input (RGK600)
• CAN bus interface (RGK601)
• Advanced Programmable I/O
• 2 LED’s indicate operating mode sand
• “Autocall”function for automatics ending of email’ sand SMS at predefined events/alarms.
• IECIP54DegreeofProtection

Specification

• High Accuracy TRMS Measurement
• 12-24VD Cuniversal battery power supply
• 3analog inputs for oil pressure,engine temperature,fuel level.
• 3-phase+neutral mains Voltage reading input
• 3-Phase+neutral Gen-set Voltage reading input
• 3-Phase load currents reading input.
• Rated measurement Voltage 480 VAC
• Generator Control: Phasese quence,maximum and minimum Voltage and Frequency
• Voltage Asymmetry
• Rated input Curren t5A/1A
• Rated Voltage Range 100-480VAC
• Rated Frequency 50 / 60MHZ

Features

• Back lit Icon type large LCD graphic Display
• USB/Optical and Wi-Fi porton front for programming
• PLC logic for Input,Output sand internal status
• Communication Port RS-485
• “Auto call ”function for automatics ending of email’ sand SMS at predefined events/alarms
• Generator Control: Phase sequence, maximum and minimum Voltage and Frequency
• Voltage Asymmetry
• Alarm Text Customize able (8alarms)
• CAN bus J1939 Engine ECU Control Communication interface
• 4 analog inputs for oil pressure,engine temperature,fuel level control&programmable.
• 10 LED’s indicate operating mode sand states
• Expansion bus with 3 slots for EXP Series expansion module
• Advanced ProgrammableI/Of unction
• Integrated PLC logic with thres holds,Counter,alarms states
• 9 digital input,10 digital output
• 3 analog inputs for oil pressure,engine temperature,fuel level.
• Storage of last 250 events
• High Accuracy TRMS Measurement
• IECIP65 Degree of Protection

Specifications

• Neutral Current measurement range:0.050-6A or0 .05-1.2A
• 12-24 VDC universal Power Supply
• VA Cinput:Main sand generator L1-L2-L3-N
• Voltage control forone,two and three phase systems with or without neutral.
• Power Supply range:8-36VDC
• 3-phase+neutral mains Voltage  reading input
• 3-Phase+neutral Gen-set Voltage reading input
• 3-Phase+neutral or earth load current reading input
• Rated input Current 5A/1A
• Programmable Maintenance

Paralleling/Synchronizing Controllers for “Mains to Generator”

Backlit Graphic LCD with RS-485 Port Size: 240 X 180 X 33mm

Features

• Automatic mains failure (AMF)functions
• Back lit Icon type large LCD graphic Display
• Main – Generator Synchronizing
• Main-Generator load sharing with peak control of one of two sources
• Advanced ProgrammeableI/OF unction
• Mains controls: Phase sequence, Phase Loss,maximum & minimum Voltage & Frequency.
• Voltage as ymmetry
• With RS-485 Port,USB/ Optical and Wi-Fiport on front for programming
• Paralleling super vision of generator (island mode with load sharing)
• “Auto call function for automatic sending of email sand/or SMS at predefined events/alarms
• Memorization of last 250 events
• Isolated CAN port for multiple gensetinter communication (Load Sharing & Power Management)
• Expansion bus with 4s lot for Expseries Expansion Module
• 10 LED’s indicate operating mode sand states
• Integrated PLC Logic with thres hold,counter,alarms,states.
• IECI P65 Degree of Protection

Specifications

• 12-24 VDC universal battery power Supply
• VAC input: Mains L1-L2-L3-N
• VAC input: Generator L1-L2-L3-N
• High accuracy TRMS Measurement
• 3-phase+neutral mains Voltage reading input
• 3-Phase+neutral genset Voltage reading input
• 3-Phase+neutral or earth load current reading input.
• 4 analog input for resistive sensors,13 digital inputs,10 digital output
• Current measurement input (3PH+N):0.05-6A
• Fourth CT for neutral measurement o rearth/ground leak age detection
• Programmed Maintenance

Paralleling/Synchronising Controllers for “Generator to Generator”

Features

• Stand Alone Function
• Back lit Icon type large LCD graphic Display
• Multiple Gen-set Paralleling Control Synchronizing
• Advanced Programmable OF function
• With RS-485 Port,USB / Optical and Wi-Fi port on front for programming
• Parallelings uper vision of generator(island mode with load sharing)
• “Auto call function for automatic sending of email sand / or SMS at predefined events/alarms
• Memorization of last 250 events
• Isolated CAN port for multiple Gen-set intercommunication (Load Sharing & Power Management)
• Expansion bus with 4 slot for Expseries Expansion Module
• 10 LEDs indicate operating mode sand states
• Integrated PLC Logic with thres hold,counter,alarms,states.
• IECI P65 Degree of Protection

Specifications

• 12-24VDC universal battery power Supply
• High accuracy TRMS Measurement
• 3-Phase+Neutral Mains Voltage reading input
• 3-Phase+Neutral Gen-set voltage reading input
• 3-Phase+Neutral or earth load Currents reading input
• 4 analog input for resistive sensors,13 digital inputs,10 digital output
• Current measurement input (3PH+N):0.05-6A
• Fourth CT for neutral measurement or earth / ground leak age detection
• Programmed Maintenance.

ATS Controller for “Mains to Generator” & “Generator to Generator”

Features

• Back lit Icon type large LCD graphic Display
• Multiple Gen-set bus in parallel with Mains ATS with closed transition
• Advanced Programmeable /OF unction
• With RS-485 Port,USB / Optical and Wi-Fi port on front for programming
• ControlandSynchronizeMainsparalleloperationwithapowerbuscomposedbyaseriesof
• “Auto call function for automatic sending of email sand / or SMS at predefined events/alarms
• Advanced Power and Load sharing Management
• Memorization of last 250 events
• Isolated CAN port for multiple Gen-set intercommunication (Load Sharing&Power Management)
• Expansion bus with 4 slot for Exp series Expansion Module
• 10 LED sindicate operating mode sand states
• Integrated PLC Logic with thres hold,counter,alarms,states.
• IECI P65 Degree of Protection

Specifications

• Control of maximum 32 Gen-sets with automatic mains synchronization and parallel management
• 12-24VDC universal battery power Supply
• High accuracy TRMS Measurement
• 3-Phase+neutral Mains Voltage reading input
• 3-Phase+neutral Gen-set Voltage reading input
• 3-Phase+neutral or earth currents reading input
• 4 analog input for resistive sensors,13 digital inputs,10 digital output
• Current measurement input(3PH+N):0.05-6A
• Fourth CT for neutral measurement or earth / ground leak age detection
• Programmed Maintenance