Digital Multimeters & Energy Analyzers

Products > Energy Management > Energy Monitoring/ Energy Analyzers > Lovato > Digital Multimeters & Energy Analyzers

Digital Multimeters & Energy Analyzers

With ICON type large LCD display, with white backlight, & Special Features

DMG 600(Flush Mount Standard 96х96mm) Power supply 100-440VAC/ 120-250VDC Front optical port
DMG 610(Flush Mount Standard 96х96mm) Power supply 100-440VAC/ 120-250 VDC Front optical port and built-in RS485 Serial Port

Features

  • Front optical port direct connection to a PC USB port (CX01) or via Wi-Fi(CX02)
  • Possible to see on smart phones or tablets through SAM1 app (Apple’s, iOS and Android)
  • Alarms and notifications by flashing display (backlight flashing)
  • Wide – range power supply(100-440VAC)
  • High measurement accuracy (0.5% for Voltage &Current)
  • Programmable CT secondary: 5A or1A
  • Active energy counters always available in all the pages
  • Bar graph percentage of a full-scale value
  • Suitable for 3-Ph with and without neutral,
  • Balanced 3-ph,2-ph,single-phase
  • Expandable through modules
  • IP54 IEC degree of protection
  • Suitable for LV, MV and HV electric systems and installations

Main Measurements and functions include:

  • V, A, KW, KVAR, KVA, PF, Hz, KWH, KVARH
  • Total Harmonic Distortion (THD): Voltage and current
  • Maximum demand (MDI) of Power and Current values
  • Active Power Un-balance (Spread in KW between L1-L2, L2-L3, L3-L1)
  • Voltage Asymmetry (Phase to phase and Phase voltages)
  • Current Asymmetry
  • Energy Counters (Active, Reactive, Import & Export, apparent energy Total &Partial)
  • Hour Counter (Total &Partial)
  • High-Low-Average value functions
  • InputRange: V Input 100~600V 50/60Hz / I Input 0.025~5A
DMG100(Modular 4U multi meter with back lit LCD icon display) Aux Power supply 100…240VAC / 115…250VDC
DMG110(Modular 4U multimeter with back lit LCD icon display) Aux Power supply 100….240VAC / 115…250VDC With integrated RS485 serial Port

Special Features:

  • Backlit icon type large LCD display
  • Alarms and notifications by flashing display (backlight flashing)
  • Display of Voltage and Current Harmonics up to 15th
  • Maximum power demand management
  • Wide range auxiliary power supply (100-240VAC) / 115….250VDC
  • Measurement accuracy (0.5% for Voltage &Current)
  • 4- quadrant measurement
  • 3-ph + N Voltage input: 50…. 720VAC (600VACrated)
  • 3-ph current input : 25mA…. 6AAC , programmable CT 5A/1A
  • Bar graph percentage of a full-scale value
  • Suitable for 3-Ph with and without neutral
  • Balanced 3-ph, 2-ph, single-phase
  • IP40 degree of protection
  • Suitable for LV, MV and HV electric systems and installation

Main Measurements and functions include:

  • V, A, KW, KVAR, KVA, PF, Hz, KWH, KVARH
  • Voltage (VL-L, VL-N) and current harmonic distortion up to 15thorder
  • Total Harmonic Distortion (THD): Voltage and current
  • Maximum demand (MDI) of Power and Current values
  • Voltage Asymmetry
  • Current Asymmetry
  • Energy Counters (Active, Reactive, Import & Export, apparent energy Total & Partial)
  • Programmable partial and total hour counter
  • Hour Counter enable when a measure is higher or lower a limit threshold
  • Maximum, average and minimum values for all measurements
  • Input Range: VInput50…720VAC (600VACrated); I Input 1A~5A
DMK16V, A, KW, KVAR, KVA, PF, Hz, KWH, KVARH, Hour Counter Total 49 Electrical Parameters Size: 96 x 48mm
DMK20V, A, KW, KVAR, KVA, PF, Hz,
Total 47 Electrical Parameters Size: 96 x 96mm
DMK22V, A, KW, KVAR, KVA, PF, Hz, KWH, KVARH
RS485 Port built-in.
Total 47 Electrical Parameters Size: 96 x 96mm
DMK32V, A, KW, KVAR, KVA, PF, Hz, KWH, KVARH
RS485 Portbuilt-in.
Maximum Demand (Power & Current) Import&Export: active–reactive power, harmonic analysis, Digital Outputs: 1 Relay + 1 Suitable for LV-MV-HV Systems.Total 251 Electrical Parameters Size: 96 x 96mm
DMG210Din Rail Mounting, 4-module, Graphic 4-key LCD display
V, A, KW, KVAR, KVA, PF, Hz, KWH, KVARH
RS485 Port built-in.
Maximum Demand (Power & Current) Total Harmonic Distortion of V & I Hour Counter, Import &Exportenergy, Suitable for LV-MV-HV systems Total 160 Electrical Parameters
DMG700160 measured electrical quantities, expandable Flush-Mount version, 96x96mm Graphic 4 – Key LCD Display V, A, KW, KVAR, KVA, PF, Hz, KWH, KVARH THD (Total Harmonic Distortion Analyzers) Peak Values (Maximum Demand) of power & current Hour Counter (Programmable total & partial) Active, reactive, apparent, imported & exported energy meters (partial & total) RS485 communication port (optional) Suitable for LV-MV-HV systems
DMG800344 measured electrical quantities, expandable Flush-Mount version, 96x96mm
Graphic 4 – Key LCD Display V, A, KW, KVAR, KVA, PF, Hz, KWH, KVARH THD (Total Harmonics analysis of voltage & current up to 31 order) Peak Values (Maximum Demand) of power & current Hour Counter (Programmable total & partial)
Active, reactive, apparent, imported & exported energy meters (partial & total) RS485, RS232, USB, Ethernet Communication (Modules: Option) Suitable for LV-MV-HV systems
DMED 310T2(4U 72 mm Modular Construction for DIN-RAIL) Power supply 220~240/380~415 VAC (Expandable)
DMED 330(4U 72 mm Modular Construction for DIN-RAIL) Power supply 220~240 /380~415 VAC (With Built-in Rs-485)

Main Measurements and functions include:

  • V, A, KW, KVAR, KVA, PF, Hz, KWH,KVARH
  • Total Harmonic distortion (THD): Voltage and Current (DMED330)
  • Maximum demand (MDI) of Power and Currentvalues
  • Active Power Un-balance (Spread in KW between L1-L2, L2-L3,L3-L1)
  • Voltage Asymmetry (Phase to phase and Phasevoltages)
  • CurrentAsymmetry
  • Energy Counters (Active, Reactive, Import & Export, apparent energy Total &Partial)
  • Hour Counter (Total &Partial)

Our Partners