I. DIGITAL TACHOMETERS

  1. PORTABLE DIGITAL TACHOMETERS: Contact/Touch type with memory
    Model: DT-2235B
    • Range: 0.5 to 19,999 RPM
    • Resolution: 0.1 RPM (upto 1000 RPM), 1RPM (Over 1000 RPM)
    • Display: 5 digits, 10mm (0.4") LCD
    • Supplied with special ring to measure Linear & Surface Speed 0.05 to 1,999.9 m/min, 0.2 to 6,560 ft/min
    • Memory call button gives LAST VALUE/MAX VALUE/MIN VALUE
  2. PORTABLE DIGITAL TACHOMETERS: Photo type with memory
    Model: DT-2234B
    • Photo Type (with memory)
    • Range : 5 to 99,999 RPM
    • Resolution: 0.1 RPM (upto 1000 RPM), 1RPM (Over 1000 RPM)
    • Display: 5 digits, 10mm (0.4") LCD
    • Memory Call Button gives LAST VALUE/MAX VALUE/MIN VALUE.
  3. PORTABLE DIGITAL TACHOMETERS:
    Model: DT-2234BL
    • Photo Type with Laser (10 to 99,999 RPM)
    • Resolution: 0.1 RPM (upto 1000 RPM), 1RPM (Over 1000 RPM)
    • Display: 5 digits, 10mm (0.4") LCD
    • Memory Call Button gives LAST VALUE/MAX VALUE/MIN VALUE
  4. PORTABLE DIGITAL TACHOMETERS: Touch & Photo Combined Type with memory
    Model: DT-2236

    PHOTO TACHO
    • Measuring Range: 5 to 99,999 RPM
    • Resolution: 0.1 RPM (0.5 - 999.9 RPM) - 1 RPM (OVER 1,000 RPM)

    CONTACT TACHO
    • Measuring Range: 0.5 to 19,999 RPM
    • Supplied with Special ring to measure linear & Surface Speed : 0.05 to 1999.9 m/min, 0.2 to 6560 ft/min
    • Display : 5 digits, 0.4", LCD with function Indicator.
    • Memory Call Button gives LAST VALUE/MAX VALUE/MIN VALUE.

  5. PORTABLE DIGITAL TACHOMETERS/STROBOSCOPE:
    Model: DT-2259
    • Photo Type Tachometer (5 to 99,999 RPM)
    • Combined with Digital Stroboscope (100 to 100,000 RPM)
  6. DIGITAL STATIONARY TACHOMETERS: Panel Type
    Model: DT-2240D
    • Measuring Range: 5 to 100,000 RPM
    • Resolution : 1 RPM upto 9999 RPM
    • 4 Digits 0.5" red LED Display, 96 x 48mm
    • Supplied with sensor PSN25-5DP (PX-01)
  7. DIGITAL STROBOSCOPE:
    Model: DT-2239A-2 / 220VAC, 50Hz/60Hz
    • Portable Type.
    • Measuring Range : 100 to 10,000 Flashes per minute.
    • Accuracy : ± (0.05% + 1 digit)
    • Display : 4 digits, 0.3", Red LED

 

II. DIGITAL CLAMP METERS

  1. DIGITAL AC/DC AMPS CLAMP METER (1000A)
    Model: DM-6046
    with carrying case
    Measurements:
    • AC/DC Current : 200A, 1000A
    • AC Voltage : 0.1mV to 600V
    • DC Voltage : 0.1V to 200V
    • Resistance : 1 to 2000 ohm
    Features:
    • DATA Hold Button for holding the reading.
    • Display : 0.5" LCD, 3½ digits.
    • Clamp Opening Max: 35mm
  2. DIGITAL AC/DC AMPS CLAMP METER (2000A)
    Model: DM-6057
    with carrying case
    Measurements:
    • AC/DC Current : 200A, 2000A
    • AC Voltage : 1V to 750V
    • DC Voltage : 0.1V to 200V
    • Resistance : 0.1 to 2000 ohm
    • Diode check : Facility built-in
    Features:
    • DATA Hold and PEAK Hold Switches for holding reading.
    • Display : 0.5" LCD, 3½ digits.
    • Clamp Opening Max: 50mm
  3. PORTABLE ACA DIGITAL LEAKAGE TESTER
    Model: DL-6054
    • 3½ Digits 13mm (0.5") LCD
    • Range: 200mA/20A/200A
    • Resolution: 0.1mA/0.01A/0.1A
    • High precision mA leakage sensing with Data Hold & Crystal time base

 

III. DIGITAL MULTIMETERS, CAPACITANCE & LUXMETERS:

  1. AUTO RANGE DMM:
    Model: DM-9092
    • Bar Graph, 3200 digital display counts
    • DCV, ACV, ohms, hFE, ACA(10A), DCA(10A), Diode, Range/Data Hold
    • 4 Digits 16mm (0.63") LCD with Annunciators
    • Compact & Strong housing case
    • Design meets IEC1010 safety requirement
  2. DIGITAL CAPACITANCE METER:
    Model: DM-9023
    • 9 Ranges: 200pF, 2nF, 20nF, 200nF, 2uF, 20uF, 200uF, 2000uF, 20000uF
    • 3½ digits 18mm (0.7") LCD display, Rotary Selector Switch
  3. DIGITAL INSULATION TESTER:
    Model: DI-6300
    • 200M ohm (100V), 200M ohm (250V)
    • 200M ohm (500V), 1000M ohm (1000V)

  4. DIGITAL POWER ANALYZER BENCH TYPE:
    Watt, VA, PF, ACV, ACA, VAR, KWH, DCV, DCA, OHMS, RS232 O/P
    1. Software for datalogging/datarecorder
    2. RC232 Cable for above … … … on request
  5. PORTABLE DIGITAL LUXMETER ALONGWITH SEPARATE PROBE
    Model: LX-107
    • Range: 0 - 2000/20,000/100,000 Lux with Data Hold & with memory facility
    • Light Source Selection: Tungsten, Fluorescent, Mercury & Sodium
    • Lux/Ft-candle reading selection
    • Quality Light Meter based on microprocessor circuit

 

IV. DIGITAL THERMOMETERS:

  1. PORTABLE DIGITAL THERMOMETER (Dual Channel input)
    Model: TM-914C
    • With one TP-02A Thermocouple Sensing Probe
    • 3½ Digits 15 mm (0.5") LCD
    • Range: - 40C to 1200C
    • Resolution: 1C
    (Thermocouple sensing probe TP-02A (-50 to 900C) Separately available)
  2. 3 in 1-DIGITAL NON-CONTACT THERMOMETER WITH LASER POINTER
    Model: TM-2000
    • Infra Red Range: -20 to 400C
    • Thermocouple: K, J, R, E, T: -100 to 1700C Max
    • RTD: PT100 ohm
    • RS232 O/P available for computer recording
    • Software & Cable (optional)

 


V. CALIBRATORS & CHECKERS:

  1. CURRENT CALIBRATOR
    Model: CC-420
    • High Precision source;
    • Measurement of a current signal;
    • Power & measurement of two wire transmitter:
    • Source: Output 0 - 24 mA current for loads upto 500 ohms
    • Measure: 0 - 24 mA current signal or -25% to 125% (4 - 20mA or 0 to 100%)
    • Power/Measure: Provides power (12VDC ±2V) to the loop and measures current
    • Resolution : (Measure/Source):
    • Range 0 to 19.99mA : 0.01 mA - 0 to 24.0 mA : 0.1 mA - -25 to 125% : 0.1%
    • with LCD Display
  2. CURRENT SIMULATOR: (CALIBRATION CHECKER)
    Model: CC-MA
    • Simulates Output ranges of 4mA, 12mA & 20mA from transmitter
    • Ideal for checking calibration & as a current source.
  3. THERMOCOUPLE SIMULATOR FOR TYPE K: (CALIBRATION CHECKER)
    Model: CC-TEMPK
    • Choice of type K thermocouple with 4 common check points in 0C & 0F

    0C ( 32F)
    100C ( 212
    F)
    500
    C ( 932F)
    1000
    C (1832F)

  4. RCCB/ELCB CHECKER:
    Model: RCB-220V
    • Mains Voltage : 200 to 240V 50/60 Hz
    • Residual/Earth Leakage Current Circuit Breaker Test
    • Checking Socket Pin Assignment
    • Rated Tripping Current Settings : 10mA, 30mA, 100mA, 300mA & 500mA
    • Test Current Duration : Approx. 140ms to 200ms according to DIN, VDE

  5. LAN CABLE TESTER
    Model: LAN-922

 

VI. SOUND LEVEL METERS
Model: SL-4011 Portable unit
• Range: 3 ranges, 35 to 130 dB
• Frequency & Time weighting meets IEC651 type 2
• A,C weighting, Max. Data Hold

 

VII. ANEMOMETER/AIR FLOW METER (W/TEMPERATURE)
Model: AM-4202
• 0.4 to 30.0 m/s, ft/min, km/h, knots

 

VIII. WEIGHING SCALE 100KG, BENCH PLATFORM TYPE
Model: GB-100KG
• Range: 0.05 Kg to 100 Kg, 0.1 lb to 200 lb
• Supplied with AC adapter
• Also usable with batteries

 

IX. VIBRATION METER
Model: VB-8200
• Ranges:
a) Velocity: 20 and 200 mm/s
b) Acceleration, 2 ranges: 200 and 2000 m/s
• RS232 Serial output
• Software and Cable optional

[ Item Description ] | [ Back To Index ]

© Copyright 2003 Jubilee Corporation Pakistan All rights reserved.